Install Litecoin, DASH, and other bitcoind based altcoins ...

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone https://github.com/Streamies/Streamies.git 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./autogen.sh ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
ls 
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example run.sh. Then we need to make it runnable so:
sudo chmod +x run.sh 
Now to run it, it's just:
./run.sh 
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

How to get Energi Wallet running on Raspberry Pi 4

How to get Energi Wallet running on Raspberry Pi 4
Hello,
I'm new to the Raspberry Pi and trying to get the NRG Core Cryptocurrency wallet running on my Raspberry. Finally I was able to compile the files after this commands:
Download and install the newest updates sudo apt-get update && sudo apt-get upgrade
Install the following major dependencies packages sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
Install the following QT dependencies packages sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
Install bitcoin PPA files cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
Add this line to the file: deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
Close file
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
Clone Github cd git clone https://github.com/energicryptocurrency/energi.git
Install Libdb4.8 Libdb4.8-dev Libdb++ Libdb4.8++-dev
Compile the wallet cd energi ./autogen.sh ./configure --with-boost-libdir=/uslib/arm-linux-gnueabihf make sudo make install
After compiling I see the files in /uslocal/bin
https://preview.redd.it/25m1nm8164k41.jpg?width=2016&format=pjpg&auto=webp&s=3dfec55b307187eea06a279e284a19a6ae5d6d37
No I need to know how to use this files? Can someone help me please?
submitted by FCU4ever to energicryptocurrency [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Lightning node setup - estimation (time needed)?

Hi, at work I may try to sell this idea to my boss, to setup a bitcoin lightning node. We have a good infrastructure and it would be quite cool to have a node running on one of our dedicated VMs.

My boss or the person who will approve/deny this idea may ask me of course how much will this cost, in time and money. I didn't do much research yet, but seen several tutorials how to setup a lightning node... thus I may include also the time to do more research...

Here various tutorials I've found so far:
- Detailed guide to installing LND and Bitcoind on Ubuntu 16.04 LTS for Mainnet (this seems very good for ubuntu users)
- Bitcoin Lightning Node on Ubuntu Linux
- The Lightning Network: How to install and (hopefully) make money
- Installing Lightning Network part 2: Here We Go Again
- Bitcoin Lightning Network: run your node at home for fun and (no) profit (explains how to install LND, which saves space as the blockchain doesn't need to be stored locally)

Other resources:
- Bitcoin Core Download (since I use ubuntu I may use the PPA)
- Lightning LND Releases (this still needs to be compiled)

Can you help me estimating this task? I tried to split it into sub-tasks:
- Install Ubuntu Linux on VM, setup SSH, firewalls, basic dependencies: 4h
- Follow tutorial to install bitcoin and lightning daemons: 8h
- Setup/automate backup: 4h
- Documentation (write down notes -if different than existing tutorials- to make things work & share the results): 4h
- Time spent researching, estimating, making an offelittle presentation of the project: 4h

Total estimation: 3 days
- The initial step to download and verify the blockchain (even if in prune mode it won't be stored, this is required) takes a few days

Is this realistic? Did I forget some parts? Should I estimate more time? (I personally tend to underestimate tasks)

Your feedback is welcome, thank you
submitted by firepol to Bitcoin [link] [comments]

Step by step in staking Redd with Raspberry Pi 3

Before I start, I would like to pay complete credits to these two guys :)
https://www.reddcointalk.org/topic/2679/reddcoin-staking-via-ubuntu-mate-on-raspberry-pi-3-model-b-march-2018 (most of my steps, if not all, are from this link)
https://github.com/joroob/reddcoin/blob/mastedoc/build-arm.md
All the steps I am writing is ABSOLUTELY NECESSARY, please don't try to skip it because I did, and it doesn't work.
step 1: get a Raspberry Pi B https://www.raspberrypi.org/products/#buy-now-modal
step 2: make sure you get proper power supply 5v 2A - the Pi will mine, it will need sufficient power. Regular USB samsung charger will not work.
step 3: get proper micro SD card (SanDisk for example) 32Gb++
step 4: USB + Mouse keyboard
step 5: flash micro SD card with Ubuntu MATE
Download Ubuntu Mate image: https://ubuntu-mate.org/raspberry-pi/
Download Etcher: https://etcher.io
After finishing downloading, use Etcher to write/flash the image on micro SD card
After this, your SD card contains Ubuntu MATE OS.
step 6: Place SD Card into Raspberry Pi 3 and start it up. You should be able to see Ubuntu OS! Congrats!
step 7: Connect to wifi or internet cable (internet is better and faster)
step 8: OPTIONAL - turn off UI OS, so that things will work faster
Open XTerminal:
sudo systemctl disable lightdm.service (to turn UI off) 
in case you want to turn UI on again, run this:
sudo systemctl start lightdm.service (to turn UI on) 
step 9: install all dependencies
sudo apt-get update && sudo apt-get install git build-essential libqt4-dev libprotobuf-dev protobuf-compiler libtool autotools-dev autoconf libssl-dev libboost-all-dev wget pkg-config sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install db4.8 sudo apt-get install libminiupnpc-dev sudo apt-get install libqrencode-dev Reboot 
step 10: add additional RAM (sort of) in case the App need it, this is call "Create Swap file"
sudo fallocate -l 1G /swapfile sudo chmod 600 /swapfile sudo mkswap /swapfile sudo swapon /swapfile echo ‘/swapfile none swap sw 0 0’ | sudo tee -a /etc/fstab 
step 11: Build Berkeley Database
wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar xfvz db-4.8.30.NC.tar.gz cd db-4.8.30.NC cd build_unix ../dist/configure --enable-cxx make sudo make install 
step 11.5: Set BerkeleyDB path
export CPATH="/uslocal/BerkeleyDB.4.8/include" export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib" export LD_LIBRARY_PATH=/uslocal/BerkeleyDB.4.8/lib/ 
step 12: Build Reddcoin Wallet
---download source code ---- only source from joroob/reddcoin will work because some stweak was needed for ARM CPU
cd ~ git clone https://github.com/joroob/reddcoin.git 
---build reddcoin ----
cd reddcoin ./autogen.sh ./configure --with-gui=no --disable-tests cd src make sudo make install 
If you finish this, you are in a great position!!!
step 13: Create reddcoin configuration file
cd ~ mkdir .reddcoin && cd .reddcoin nano reddcoin.conf rpcuser=YOUR OWN USERNAME, YOU DONT NEED TO REMEMBER THIS, MAKE IT AS LONG AS YOU WANT rpcpassword=YOUR OWN PASS WORD, YOU DONT NEED TO REMEMBER THIS, MAKE IT AS LONG AS YOU WANT 
step 14: Use bootstrap
(At this point, you had a running reddcoin daemon, now you can start staking. But syncing the full chain takes long time.)
cd ~/.reddcoin wget https://github.com/reddcoin-project/reddcoin/releases/download/v2.0.1.2/bootstrap.dat.xz xz -d bootstrap.dat.xz 
step 15: start the reddcoin daemon service cd ~/reddcoin/src ./reddcoind -daemon
After this, you can test if the daemon is working, by perform this command: ./reddcoin-cli getblockcount
step 16: if your app is not able to sync, it is probably the firewall issue with OS, run this to allow port 45444 (used by Reddcoin) and redo step 15
sudo iptables -I INPUT 1 -i eth0 -p tcp --dport 45444 -j ACCEPT sudo iptables -A OUTPUT -p tcp --dport 45444 -j ACCEPT 
step 17: open BEER and enjoy! This is a MUST or the daemon will stop working! I am not kidding!
step 18: Actually, i forgot to mention you need to execute this command for the wallet to stake:
reddcoind walletpassphrase $yourpassword 9999999 true 
ADDITIONAL REMARKS:
From my PC: I am using putty to execute the command, winSCP to monitor the file location on raspberry.
Moving Red Coins out of exchange really a big move, start with normal wallet, don't start with this tutorial :) Ever since I move my coins out of exchange, I am free from all of the ups and downs! Really!
So guys and gals, Redd On!
UPDATE 18 Mar: my first stake has arrived after 6 days staking :)
In case you want to tip me: RaF3TeWqgTzAdnaZQffnsxS74dag13zsAY
Edit 1: Format stuff
Edit 2: Add step 18 to execute staking command.
Edit 3: In case you don't want to compile the source code, you can download my compile version here: https://github.com/hieplenet/reddcoin/releases/tag/v2.0.0.0 (but doing this, you should be aware of the risk of me changing source code for my benefit - I don't change any thing, but you should be cautious, this is the internet :) )
submitted by hieplenet to reddCoin [link] [comments]

How to install any QT-Wallet on the Raspberry Pi / Pi3B+

Hello and welcome to my first tutorial. Today I will show you how to install almost any QT-wallet on the RaspberryPi. I hope this tutorial will help you. I use the BankSocietyCoin in this tutorial, you can change it also to your fav. Coin.

Install Raspbian , *Buster produced a lot of failures on my system while compiling Wallets*
(my version: https://downloads.raspberrypi.org/raspbian/images/raspbian-2018-03-14/ )
Run the following commands:

Change Swap Size of the Rasp:

sudo nano /etc/dphys-swapfile
change to CONF_SWAPSIZE=2048
press: ctrl o Enter and ctrl x
enable the swap file with its new size:
sudo dphys-swapfile setup
sudo dphys-swapfile swapon
----------
Install Required Dependencies:

apt-get update
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
and
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
----------
Install bitcoin PPA files for the compiling process:

cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
paste to following line:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
press: ctrl o Enter and ctrl x
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
----------
Install working libssl:

cd && sudo apt-get remove libssl-dev
sudo nano /etc/apt/sources.list
change stretch to jessie
press: ctrl o Enter and ctrl x
sudo apt-get update
sudo apt-get install libssl-dev
sudo apt-mark hold libssl-dev
sudo apt-mark hold libssl1.0.0
sudo nano /etc/apt/sources.list
Change jessie" back to stretch
press: ctrl o Enter and ctrl x
sudo apt-get update
----------

Compile and Install BerkeleyDB 4.8.30 :

wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
sudo tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix
sudo ../dist/configure --enable-cxx
sudo make
sudo make install
export CPATH="/uslocal/BerkeleyDB.4.8/include"
export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib"
----------

The wallet:

(my way) mkdir wallets , cd wallets
git clone https://github.com/RGPickles/BankSocietyCoin
cd BankSocietyCoin
chmod 755 src/leveldb/build_detect_platform
chmod 755 src/secp256k1/autogen.sh
cd src/
make -f makefile.unix
./societyd
* for qt wallet*
cd ..
qmake
make
edit society.conf in .society
(rpcuser=SomeCoolRandomUsername
rpcpassword=SOMETHINawesomeYOUdontHaveToRemember
rpcconnect=127.0.0.1
save.
./society-qt
----------

Have fun!
for a Beer - Donations ;)
SOCI - Si6V7EwnJqzmFiNGHSbXrtWUXKH6F4EFm3
BTC - 1HpGF4wMzztpJ4KT4o2ySFvnLJ4gCoYaV5
LTC - LS22MgY9G4KbaKhkR5dFi995MbcQhuyDXW
ETH - 0x6b5EdC3e58Fd84a40aa942964690adA91C398075
TRX - TKBpktt5QQ9WV57QjonQrGr1vmKLCVQBL6

13.07.2019 DennisHilk




**********
if error (makefile.unix:200: obj/rpcclient.o] appears)
[This first step is necessary because you will get linking errors if you don't remove the old Boost library]
sudo apt remove --purge --auto-remove libboost-dev libboost-thread-dev libboost-system-dev libboost-atomic-dev libboost-regex-dev libboost-chrono-dev
mkdir boost
cd boost
wget https://dl.bintray.com/boostorg/release/1.64.0/source/boost_1_64_0.tar.gz
tar xfz boost_1_64_0.tar.gz (can take rly long, dont worry)
cd boost_1_64_0/
./bootstrap.sh
./b2 stage threading=multi link=static --with-thread --with-system
sudo ./b2 install threading=multi link=static --with-thread --with-system
cd ../../
nano .bash_profile
export LIBS="-L/home/YOURS/boost/boost_1_64_0/stage/lib"
export CPPFLAGS="-I/home/YOURS/boost/boost_1_64_0"
cd society root
make clean
cd src
sudo make -f makefile.unix

(if bignum error)
sudo apt-get install libgmp-dev
or delete opensll and reinstall as above.
submitted by dennishilk to u/dennishilk [link] [comments]

Dogecoin on Linux - The Complete Beginner's Guide

I'm writing this because I couldn't find a single condensed guide on compiling the wallet and running mining software on linux, specficially Ubuntu/Linux Mint. I combed Bitcoin and Litecoin forums for similar problems I was running into and eventually got everything nailed down, so here it is in one place, for new Shibes.
If you want to make a Dogecoin directory in your downloads folder to keep things organized, you will need to modify these commands to refelct the change. So instead of going to ~/Downloads/ you will need to go to ~/Downloads/Dogecoin and be sure to put the zipped files there when you download them, but the commands will be the same otherwise.
cwayne18 put in the work to make a PPA for the QT client here.
Ubunutu/Mint/Debian users should be able to install the client with the following commands:
sudo add-apt-repository ppa:cwayne18/doge sudo apt-get update && sudo apt-get install dogecoin-qt 
To update using this method, run
sudo apt-get update && sudo apt-get upgrade dogecoin-qt 
Compiling the Wallet Manually
I suggest using the PPA above, but if you want to compile manually, here you go.
1)Download the newest source from here. If you want to check out the Github page, click here
2)Unzip the package with the native client OR, navigate to your downloads and unzip
cd ~/Downloads unzip dogecoin-master.zip 
3)Now it's time to compile. You will need to install the dependencies, just copy and paste the following code. It will be a fairly large download and could take some time. It is always important to update before installing any new software, so we'll do that first and then install the dependencies.
sudo apt-get update sudo apt-get upgrade sudo apt-get install libssl-dev libdb-dev libdb++-dev libqrencode-dev qt4-qmake libqtgui4 libqt4-dev sudo apt-get install libminiupnpc-dev libminiupnpc8 libboost-all-dev build-essential git libboost1.53-all-dev 
4)Once that is done, go to the doge-coin master directory and compile:
cd ~/Downloads/dogecoin-maste sed -i 's/-mgw46-mt-sd-1_53//g' dogecoin-qt.pro qmake USE_UPNP=- USE_QRCODE=0 USE_IPV6=0 make -j3 
After running the qmake command you will likely see some text similar to
Project MESSAGE: Building without UPNP support Project MESSAGE: Building with UPNP supportRemoved plural forms as the target language has less forms. If this sounds wrong, possibly the target language is not set or recognized. 
It's perfectly normal, so don't worry about that.
Your Dogewallet is ready to go! The executable is in ~/Downloads/dogecoin-maste and called dogecoin-qt. Your wallet information is in ~/.dogecoin. You can run the wallet at any time by opening terminal and typing
cd ~/Downloads/dogecoin-maste ./dogecoin-qt 
Future upgrades to dogewallet are easy. Back up your wallet.dat, and simply follow the same directions above, but you'll be unzipping and building the newer version. You will likely need to rename the old dogecoin-master directory in ~/Downloads before unzipping the newest version and building. Also, it is likely that you will not need to install the dependencies again.
Alternate Method For Installing Dogecoin Wallet from Nicebreakfast
After installing the dependencies listed in step 3, open terminal, then navigate to where you want Dogecoin Wallet stored and run:
git clone https://github.com/dogecoin/dogecoin ./autogen.sh ./configure make 
then when the wallet is updated just run
git pull 
from the dogecoin directory.
GPU Mining
GPU mining requires CGminer. My suggestion is to get the executable already built. The creator of cgminer has removed the built file from his website, but I've uploaded it here
sudo apt-get install pkg-config opencl-dev libcurl4-openssl-dev autoconf libtool automake m4 ncurses-dev cd ~/Downloads tar -xvf cgminer-3.7.2-x86_64-built.tar.bz2 
Don't use anything newer than 3.7.2. The newer versions of CGMiner don't support GPU mining.
That's it! You have cgminer ready to go! You will run cgminer with the following syntax
cd ~/Downloads/cgminer-3.7.2-x86_64-built/ ./cgminer --scrypt -o stratum+tcp://SERVERNAME:PORT -u WORKER.ID -p PASS 
A good guide for fine tuning cgminer can be found here; follow the litecoin example.
EDIT
I had trouble getting cgminer running with a single line command, but running it via an executable .sh file works. This is covered in the cgminer setup guide I posted above but I'll put it here too. In the same directory that has the cgminer executable, you need to make a file called cgminer.sh and make it executable. It should contain the follwing:
export GPU_USE_SYNC_OBJECTS=1 export GPU_MAX_ALLOC_PERCENT=100 export DISPLAY=:0 find *.bin -delete sleep 5 ./cgminer 
Then you can call cgminer in terminal by doing ./cgminer.sh You will need a cgminer.conf file containing all your options. All of this is covered in the guide that is linked above.
A quick note about AMD drivers: They used to be a huge PITA to install and get working, but the newest Catalyst drivers are great. There's a GUI installer, everything works out of the box, and there is a lot of documentation. You can download them here: AMD Catalyst 14.6 Beta Linux
CPU Mining
For CPU mining I use minerd because it doesn't require any work to get running, simply download it and get to work. Download the built file for your machine 32-bit or 64-bit, and then unzip it and you're ready to go!
cd ~/Downloads tar -xvf pooler-cpuminer-2.3.2-linux-x86.tar.gz 
The executable is called minerd and it will be in ~/Downloads but you can move it to wherever you like. To run it, pull up terminal and do
cd ~/Downloads minerd --url=stratum+tcp://SERVER:PORT --userpass=USERNAME.WORKERNAME:WORKERPASSWORD 
You're done! Happy mining!
Common Issues
I ran into this and I've seen others with this problem as well. Everything installs fine but there is a shared library file that isn't where it should be. In fact, it isn't there at all.
 libudev.so.1: cannot open shared object file: No such file or directory 
In terminal, do
sudo updatedb locate libudev.so.0.13.0 
And it will probably return a path /lib/x86_64-linux-gnu. Inside that directory there's a library file called libudev.so.0.13.0. You'll need to make a symlink (aka shortcut) that links libudev.so.1 to libudev.so.0.13.0 So, assuming you're working with libudev.so.0.13.0 do this
cd /lib/x86_64-linux-gnu sudo ln -s libudev.so.0.13.0 libudev.so.1 
Now if you do
ln -l 
You should see
libudev.so.1 -> ./libudev.so.0.13.0 
Meaning you've made the symlink. Also, the text for libudev.so.1 will be blue.
submitted by Boozybrain to dogecoin [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Interesting technical facts about Groestlcoin that might explain price rise

Disclaimer: After doing some research, I own a small amount of Groestlcoin and no Vertcoin (I rkn VTC is overvalued currently). Might buy some VTC after it corrects. Here's why...
Original text: Posted by posted [–]jackielove4u 4 days ago https://www.reddit.com/groestlcoin/comments/78258z/is_grs_possibly_threatened_by_bitcoin_gold/dormg88/
Our selling points are:
submitted by enozym111 to CryptoCurrency [link] [comments]

Lost most of my Doge late 2013. There may be one last solution to getting some back. Does anyone have a copy of "DogeCoin version v0.6.4.0-unk-beta" or know which release it is directly linked to?

My keys corrupted and i didn't have a recent backup, after the upgrade lost all the doges.

I think there might be one more hope of finding some, and would appreciate if anyone knows which version " v0.6.4.0-unk-beta" which is on the debug.log output.

Noticed after all this time after digging through Bitcoin release notes that before bip32/hd wallets came in or as a matter of fact As they came in too (thanks devs). Most if not everyone i asked thought backing up the wallet.dat file is good enough, or the old --salvagewallet nor -zapwalletxes. They either aggressively scrambled the wallet making it more likely destroy even more keys, sure saved a few coins but most of the addresses in the keypool which has a size of 100 didn't have a corresponding private key anywhere in the wallet AFAIKT,
Sorry before i rant, i just need some info on if this wallet if linked to a specific Dogecoin version and just happens to say v0.6.4.0 in the debug log file.

I can't update directly to any other version without the wallet breaking up. Apparently i need the exact version that was last used, and turn it off extra safely so the log files which hold some parts of the keys go back to the Wallet.dat or something.

I tried all solutions, this might just work. from the "Bitcoin version 0.7.1 Readme file."
How to Upgrade
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or bitcoind/bitcoin-qt (on Linux).
If you were running on Linux with a version that might have been compiled with a different version of Berkeley DB (for example, if you were using an Ubuntu PPA version), then run the old version again with the -detachdb argument and shut it down; if you do not, then the new version will not be able to read the database files and will exit with an error.
Explanation of -detachdb (and the new “stop true” RPC command): The Berkeley DB database library stores data in both “.dat” and “log” files, so the database is always in a consistent state, even in case of power failure or other sudden shutdown. The format of the “.dat” files is portable between different versions of Berkeley DB, but the “log” files are not– even minor version differences may have incompatible “log” files. The -detachdb option moves any pending changes from the “log” files to the “blkindex.dat” file for maximum compatibility, but makes shutdown much slower. Note that the “wallet.dat” file is always detached, and versions prior to 0.6.0 detached all databases at shutdown.
or on shut down the coin client using the -detatchdb comas coins use both log and dat files with berkeley.

Thanks,

D_M


submitted by doge_messiah to dogecoin [link] [comments]

Litecoin Compilation Guide Linux Ubuntu 16.04

If you are on Linux Ubuntu 16.04, follow those steps (cut and paste one line at a time in a new Terminal window):
\*** ensure that the system is up to date ***** sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade sudo apt-get autoremove sudo reboot
\*** download the source code ***** mkdir Github && cd Github sudo apt-get install git git clone https://github.com/litecoin-project/litecoin cd litecoin
\*** Install the dependencies ***** sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev sudo apt-get install bsdmainutils libboost-system-dev libboost-filesystem-dev libboost-chrono-dev sudo apt-get install libboost-program-options-dev libboost-test-dev libboost-thread-dev sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev sudo apt-get install libqrencode-dev protobuf-compiler miniupnpc
\*** To install the deprecated version of Berkeley DB 4.8 ***** sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8+±dev
\*** Compile ***** ./autogen.sh ./configure make
\*** Optional ****** sudo make install
\*** Execute ***** cd ~/Github/litecoin/src/qt ./litecoin-qt
submitted by senisende to litecoin [link] [comments]

How To Setup a Seed Node for Snatcoin for Free

Seed nodes are important for the strength of the Snatcoin Network. By adding a seed node you will be supporting Snatcoin and helping it grow.
These instructions below are for Windows users.
Go to https://aws.amazon.com/free and get yourself a free Amazon web services account
After you are logged into Amazon AWS select "Launch a virtual machine".
Select "get started" on EC2 Instance. After this you will name your instance
Now select a free tier eligible Ubuntu Server 16.04.
Open up a new tab for your Security Group. Click on Actions -> Edit Inbound Rules. Change Source to My IP and save. Down the bottom you should see the IP of that computer.
Launch your AWS instance, after a while on the "Instance State" tab you should see that it is running with a green dot next to it You will create a security pair key. Download this file and keep it safe.
Download Putty from https://www.putty.org/ Then install it.
Run Puttygen and convert your *.pem file to a *.ppk file
Open Putty. Make sure the port is the same port on your AWS Security Group tab. If you didn't change anything it will be 22.
Then go to Connection -> SSH -> Auth and add your *.ppk file to private key for authentication
Add in the Public IP shown in your EC2 Management Console for your virtual machine to Putty as the Host Name
Click Open on Putty. Click Yes. Then as your username use ubuntu You should now be inside your AWS virtual machine.
Install dependencies on your Ubuntu AWS Instance
sudo apt-get install git sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options- dev libboost-test-dev libboost-thread-dev sudo apt-get install libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev sudo apt-get install libminiupnpc-dev sudo apt-get install libzmq3-dev sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler sudo apt-get install libqt4-dev libprotobuf-dev protobuf-compiler git clone https://github.com/snatcoinOfficial/snatcoin cd snatcoin cd src 
Your instance will run out of memory on rpcbitcoin.cpp if you do not run these lines below before you compile snatcoind
sudo dd if=/dev/zero of=/swapfile bs=64M count=16 sudo mkswap /swapfile sudo swapon /swapfile 
You can now run
make -f makefile.unix 
Now you can run your snatcoind daemon
./snatcoind -daemon 
This will fail and will tell you to add some extra information to your snatcoin.conf file
Now you will have to edit your snatcoin.conf file
cd .. cd .. cd .snatcoin vi snatcoin.conf 
Now you have to set up your snatcoin.conf file in the .snatcoin directory
Add to snatcoin.conf file:
addnode=18.218.135.144 addnode=159.65.182.125 rpcuser=somethinghere rpcpassword=anythinghere 
Then save the file by typing :wq
This is to verify you wrote to your snatcoin.conf file
cat snatcoin.conf 
Now go back to your snatcoin directory and run the snatcoind
cd .. cd snatcoin ./snatcoind -daemon 
Wait for the server to load and sync up to the network
You are now connected so lets find out what else we can run from snatcoind
./snatcoind help 
On Amazon AWS select Action -> Change Instance Settings -> Change Termination Protection
Then turn termination protection on to make sure it doesn't terminate
You can now close Putty and your Instance will still be alive
The new seed node I added during this process was 18.218.135.144
submitted by Myshakiness to snatcoin [link] [comments]

GRS development status (facts)

From the GRS discord:
BCG came and people discoverd that is has the same qualities as VTC
But then not premined and ASIC resistent Then people started looking for more ASIC resistent coins and came to GRS VTC has a great dev team and now people are seeing that GRS has developed a lot further then VTC Then this list came with GRS
First coin with SegWit
Only coin that has succesfully ported Bitcoin Armory
Only coin that have over 40 Electrum servers.
One of the few coins that have a Ubuntu PPA available
One of the few coins that is officially maintained by the Bitcoin Debian packaging team
Only coin that has succesfully ported Multibit HD We have 10 different Android wallets. Most struggle to have just 1.
We have 9 different Blackberry wallets. Most dont have any.
One of the few coins that have an ios wallet
We have over 10 different desktop wallets
Only coin that has ported Samourai and thus succesfully implemented BIP147. You can work with payment channels with Groestlcoin.
One of the few coins where you can play with OP_HOLD, RBF and other new features
Only coin that has ported electrum client to java
One of the few coins that has ported rushwallet.com
Only coin with over 100 repositories with developed work.
Only coin that is capable of sending GRS over SMS
Only coin that has wallets which can use NFC tags as encryption key.
Only coin that has ported Msigna.
Only coin that has ported sentinel.
Only coin that is still being compiled with Visual Studio (like Satoshi himself did)
We got now also 2 ios wallets
We got 1 more android and 1 more blackberry wallet
We have a working testnet
We got a testnet android and blackberry wallet
We got a chrome os wallet
We got 2 new webwallets
We got tor support for our electrum since january 2017
We got 40 tor servers
VTC jumped from 0.60 usd to 4usd in two weeks (my guess is partially thanks to the btc fork)
GRS is now only 0.12usd And all these have SW, LN and AS
TLDR: GRS is very well developed.
submitted by johnturtle to CryptoCurrency [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to icocrypto [link] [comments]

[P2pool] How to make your own personal p2pool Node!

Tired of getting no block rewards and sending many dead shares? Need a p2pool node close to your miner? MAKE YOUR OWN! :D
And, Yep, P2pools give 0.5% Rewards to block finders!
Here's some info about p2ools: http://whatisp2pool.com/
The stronger the P2Pool network becomes the more resistant the digibyte network is to 51% attacks!
Oh and, P2pools are DDOS proof! Now that's News! So if your node gets DDOS'd .. you dont lose your shares as the shares have been saved in the p2pool, its called the sharechain. So you get paid anyhow! Thanks to the p2pool network. and you ccan set your workers to another pool using the "--failover only" command in cgminer (if im not wrong) and get it back to work on the p2pool network!
TL;DR; P2POOL = 1 Big fat network Decentrazlized pool!
STEPS TO MAKE A P2POOL:
Install Ubuntu server or Desktop if you want http://www.ubuntu.com/download/ or u can use a VPS (VirtualPrivateServer -- Link Below with coupon code)
So Let's start off in the command line (Open Terminal.. and all you have to do is Cut, Copy Paste! ;) )
Start by updating and upgrading Ubuntu, you know you want the best ;)
sudo apt-get update sudo apt-get upgrade sudo apt-get install python-software-properties sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update 
Time for the DigiByteProject dependencies!
sudo apt-get install build-essential libboost-all-dev libcurl4-openssl-dev libdb5.1-dev libdb5.1++-dev git qt-sdk libminiupnpc-dev sudo apt-get install qrencode libqrencode-dev 
And, Now to compile DigiByte on your system!
git clone git://github.com/digibyte/DigiByteProject.git digibyte #renaming makes it easier ;) cd ~/digibyte/src mkdir obj make -f makefile.unix USE_UPNP=- sudo cp digibyted /usbin cd ~ 
After it has compiled try running 'digibyted'
./digibyte/src/digibyted 
If you get an error saying you need to make the digibyte.conf file, good! :) If it doesnt give you that error, make sure you followed the compiling steps appropriately.
So, Lets create the conf file here...
cd .digibyte #edited from 'digibyted' .. fixed!! nano digibyte.conf 
Paste the following, CHANGING THE USERNAME AND PASS!! make sure to take note of both, you'll need these later!
rpcuser=CHANGEusername rpcpassword=ChangePassword daemon=1 server=1 rpcport=14022 port=12024 gen=1 rpcallowip=127.0.0.1 addnode=74.208.230.160 addnode=31.220.25.91 addnode=184.155.218.183 addnode=24.119.23.61 addnode=70.196.193.231 addnode=198.98.118.241 addnode=142.4.204.115 addnode=23.90.191.58 addnode=216.250.125.121 addnode=115.28.31.25 addnode=83.172.105.46 
Press 'CTRL' + ' X', and then 'Y' to save when prompted
cd ~ ./digibyte/src/digibyted ./digibyte/src/digibyted getinfo 
Make sure you check the latest block in the block chain or on your local DigiByte Wallets. This is to see how far your p2pool node has gotten! This is gonna take quite a while so lets CONTINUE!
Let's get the p2pool software and frontend in! Install the p2pool dependencies!
sudo apt-get install python-zope.interface python-twisted python-twisted-web git clone https://github.com/Rav3nPL/p2pool-rav p2pool #renaming it! cd ~/p2pool/digibyte_subsidy #Thanks to Chaeplin sudo python setup.py install 
Time to edit and customise the html code to personalise your p2pool's frontend. Feel free to change the p2pool name and if you're an advanced user, feel free to add your own frontend from git hub after removing the web-static folder. (OPTIONAL: by using rm -f -r web-static #in that directory. And then you can choose whichever frontend you want! by cloning it in the web-static folder)
Editing the current frontend html!
cd .. cd web-static nano index.html 
After personalising the page, i.e. changing the p2pool name and adding some info! Lets go back and check how far the block downloading has gotten! You can check this by typing this in the command line after going back to the root directory:
cd ~ ./digibyte/src/digibyted getinfo 
This is gonna take a while so might as well check for updates again :P
sudo apt-get update sudo apt-get upgrade 
After making sure that all the blocks have been synced locally! We're ready to run the p2pool node! Simply enter the string below in the command line, entering your USERNAME and PASS that you saved earlier!
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 
If you want to charge a fee for your node add this to your string, adding your fee address!:
--fee 1.0 --address NEWDGBADDRESS 
To see if the node is up and running enter this in the command line:
screen -x myp2pool 
'CTRL' + 'A' + 'D' to close the terminal if you press 'CTRL' + 'C', it will terminate the p2pool program and you'll have to restart the pool by using the string above!
Once, Everything is setup as planned! Check your p2pool node's ip Address by entering this into the command line:
ifconfig 
inet addr: 192.168.1.1 #You'll see a line like this.
So, Your cgminer string should look something like this:
cgminer --scrypt -o 192.168.1.1:9022 -u DGBADDRESS -p x
And your p2pool WEB ADDRESS should look like this:
192.168.1.1:9022
example: http://192.168.1.1:9022/
You can monitor your p2pool using that web address! Enjoy, your personal p2pool node!! :D
If for whatever reason the server shuts off and you need to restart the p2pool node, you should run digibyted again and after it has synced successfully, just type in your p2pool string:
./digibyte/src/digibyted
screen -d -m -S myp2pool ~/p2pool/run_p2pool.py --give-author 0 --net digibyte NEWUSER NEWPASS --outgoing-conns 4 --fee 1.0 --address NEWADDRESS
PRESS CTRL + A + D to Detach from screen
UPDATE Follow Guide below if you used this guide before DigibByte v2.0 was released (28th Feb 2014)
You must check whether you're on the right ShareChain. Make Sure the block Value says 7960!
https://bitcointalk.org/index.php?topic=408268.msg5440858#msg5440858
This Tutorial was made with the help of an existing Guide: http://doges.org/index.php?topic=5586.0 Kudos to crypto49er!
If you want to do this on a VPS:
Here's a link to a VPS hosting site:
https://www.digitalocean.com/
Feel free to use my $10 ref. code -- it doesnt really make a difference, though.
https://www.digitalocean.com/?refcode=dc909c442664
Let me know if this guide helped!
submitted by StormMiner to Digibyte [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to altcoin [link] [comments]

Groestlcoin development questions.

I have some questions regarding this circulating sales pitch about Groestlcoin.
  1. First coin with SegWit
  2. Only coin that has succesfully ported Bitcoin Armory
  3. Only coin that have over 40 Electrum servers.
  4. One of the few coins that have a Ubuntu PPA available
  5. One of the few coins that is officially maintained by the Bitcoin Debian packaging team
  6. Only coin that has succesfully ported Multibit HD We have 10 different Android wallets. Most struggle to have just 1.
  7. We have 9 different Blackberry wallets. Most dont have any.
  8. One of the few coins that have an ios wallet
  9. We have over 10 different desktop wallets
  10. Only coin that has ported Samourai and thus succesfully implemented BIP147. You can work with payment channels with Groestlcoin.
  11. One of the few coins where you can play with OP_HOLD, RBF and other new features
  12. Only coin that has ported electrum client to java
  13. One of the few coins that has ported rushwallet.com
  14. Only coin with over 100 repositories with developed work.
  15. Only coin that is capable of sending GRS over SMS
  16. Only coin that has wallets which can use NFC tags as encryption key.
  17. Only coin that has ported Msigna.
  18. Only coin that has ported sentinel.
  19. Only coin that is still being compiled with Visual Studio (like Satoshi himself did)
  20. We got now also 2 ios wallets
  21. We got 1 more android and 1 more blackberry wallet
  22. We have a working testnet
  23. We got a testnet android and blackberry wallet
  24. We got a chrome os wallet
  25. We got 2 new webwallets
  26. We got tor support for our electrum since january 2017
  27. We got 40 tor servers
10, 17, 18 - For those that are less tech savvy, what are the implications of porting Samourai, Msigma and sentinel?
15 - What is the app that allows to send groestlcoin via SMS?
Thanks.
submitted by johnturtle to groestlcoin [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to CryptoCurrency [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to BitcoinAll [link] [comments]

The Qtum Test Network has been RELEASED!

The Qtum Test Network Has Been Released:
https://github.com/qtumproject/qtum/releases/tag/testnet-sparknet
Instructions on how to compile from source are listed in the Git. Please see the documentation provided:
Quickstart Build on Ubuntu This is a quick start script for compiling Qtum on Ubuntu sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils git cmake libboost-all-dev sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev # If you want to build the Qt GUI: sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler git clone https://github.com/qtumproject/qtum cd qtum # Update cpp-ethereum submodule git submodule update --init --recursive # Note autogen will prompt to install some more dependencies if needed ./autogen.sh ./configure make -j2 
If you would like to receive Test Network tokens, please PM this account with your address and we will get them sent ASAP. These test tokens will have no value, so you are free to share them with others for testing. We will have a faucet set up shortly, along with a Win64 QT shortly.
Right now the team is preparing for our launch event in Shanghai, so it may be a touch busy on our side for the next day.
Visit the Qtum Website: https://qtum.org/en/ Join the Qtum Slack: https://qtumslack.herokuapp.com/
submitted by Vindyne8 to CryptoCurrencies [link] [comments]

" Bitcoin bad " [ participating ] Heartbleed vulnerability affects bitcoins ... ( Chinese hackers published technical affirm ) - Transfer from Bitcoin first Chinese community -

weibo: http://weibo.com/5107450688/B0Kv8hLAk
BBS: http://bbs.btcman.com/forum.php?mod=viewthread&tid=17782&page=1&extra=#pid82563#0-tsina-1-83270-397232819ff9a47a7b7e80a40613cfe1
Heartbleed vulnerability affects bitcoin ... let the brother in person to tell you how dangerous loophole Heartbleed
Disclaimer: This article caused by subsequent exposure , at your own liability .
Author : btcrobot
Contribute BTC: 1NDnnWCUu926z4wxA3sNBGYWNQD3mKyes8 Originally wanted to write articles related articles side chains , but feel deep enough , the other seems a bit of a MM Frank wrote , brother does not like re- nonsense, direct point of security-related today . . . . .
Evil octal dividing line . . . . . . . . . . . .
About Heartbleed loopholes, as a bit of people , must be sensitive to , ah, brother of the first time I felt vulnerability unlimited , ideas unlimited , unlimited play , as to get rid of xxx, it needs Martian guts , brother still relatively conservative , but in another way detour and the line, this is just to let you experience the next :
Steps are as follows :
1 find various bits coins, currency cottage client IP address , find a specific port, which enable SSL
Get bitcoin client ip installed two ways :
1 Download a qt-bitcoin client, open debug.log, ok it collects inside IP
2014-04-21 01:53:27 init message: loading is complete 2014-04-21 01:53:27 Initialization result: 1 2014-04-21 01:53:28 ERROR: GetMyExternalIP (): connection closed 2014-04-21 01:53:28 receive version message: / Satoshi: 0.8.5 /: version 70001, blocks = 296904, us = 219.147.23.114:1650, them = 58.64.155.69:8333, peer = 58.64.155.69 : 8333 2014-04-21 01:53:28 Added time data, samples 2, offset -6 (+0 minutes) 2014-04-21 01:53:33 ERROR: GetMyExternalIP (): connection to 74.208.43.192:80 failed 2014-04-21 01:53:35 receive version message: / Satoshi: 0.8.2.2 /: version 70001, blocks = 296904, us = 219.147.23.114:1657, them = 192.155.81.62:8333, peer = 192.155.81.62 : 8333 2014-04-21 01:53:35 Added time data, samples 3, offset -13 (+0 minutes) 2014-04-21 01:53:35 No valid UPnP IGDs found 2014-04-21 01:53:35 upnp thread exit 2014-04-21 01:53:36 receive version message: / Satoshi: 0.8.5 /: version 70001, blocks = 296904, us = 219.147.23.114:1659, them = 194.71.109.94:8333, peer = 194.71.109.94 : 8333 2014-04-21 01:53:36 Added time data, samples 4, offset +12 (+0 minutes) 2014-04-21 01:53:36 socket recv error 10054 2014-04-21 01:53:41 ERROR: GetMyExternalIP (): connection closed 2014-04-21 01:53:48 receive version message: / Satoshi: 0.9.99 /: version 70002, blocks = 296904, us = 219.147.23.114:1680, them = 71.13.251.162:8333, peer = 71.13.251.162 : 8333 2014-04-21 01:53:48 Added time data, samples 5, offset -12 (+0 minutes) 2014-04-21 01:53:48 nTimeOffset = -6 (+0 minutes) 2014-04-21 01:53:48 ERROR: GetMyExternalIP (): connection to 212.117.175.194:80 failed 2014-04-21 01:53:48 ext-ip thread exit 2014-04-21 01:53:49 receive version message: / Satoshi: 0.9.1 /: version 70002, blocks = 296904, us = 219.147.23.114:1681, them = 68.151.120.205:8333, peer = 68.151.120.205 : 8333 2014-04-21 01:53:49 Added time data, samples 6, offset -13 (+0 minutes) 2014-04-21 01:53:50 receive version message: / Satoshi: 0.9.0 /: version 70002, blocks = 296904, us = 219.147.23.114:1682, them = 88.178.92.109:8333, peer = 88.178.92.109 : 8333 2014-04-21 01:53:50 Added time data, samples 7, offset -12 (+0 minutes) 2014-04-21 01:53:50 nTimeOffset = -12 (+0 minutes)
Look at these IP right, gather next :)
2 Use blockchain, this can cause huge point , opening https://blockchain.info/zh-cn/connected-nodes
Not only know the IP, and intuitively know the client version used for those versions vulnerable , silent, huh. .
file :/ / / C: \ DOCUME ~ 1 \ ADMINI ~ 1 \ LOCALS ~ 1 \ Temp \ ksohtml \ wps_clip_image-28929.png
3 write a small crawler , automated constantly crawl the IP, NG saved as a file in the following format , do not ask me to code. . . Their play to 193.109.68.62 212.3.147.37 Xxx Yyy . . . .
4 Improved bleed procedures through the entire document , well, to the point code
func readLines (path string) ([] string, error) { file, err: = os.Open (path) if err! = nil { return nil, err .... 00000580 32 32 2d 31 33 39 32 38 39 37 31 31 31 30 30 30 | 22-1392897111000 | ........
| onnection: keep-| | alive .. If-Modifi | | ed-Since: Fri, 1 | | 1 Apr 2014 10:35 | |: 05 GMT ........; | | `...... ~ 9D .. X. .. |
https://5.9.121.236/login/
If 443 , if it is a server , I rely on you regularly collect it, pattern matching. . . . Bypass to the other , web springboard , and the like . . . If ssl + rpc, broken rpc, if not set the wallet password, and then send a command transfer bitcoins , oh, my god ...
Bitcoins are so cottage currency would not have said that if there is 443 loopholes still be out of every minute . . .
heartbleed bitcoin client to attack , in the case of open rpc protocol , using ssl certification, can be attacked . This is the vast majority of the server program will open options. Individual users should not panic. . . .
Well, not much to say , and you figure it out , and quickly upgrade it, rose no harm ! ! ! ! The key is to site users , exchanges, router port mapping is also careful. .
Disclaimer: purely technical discussion, in fact, I guess black circle know. . . Sent to run the risk of being accused of a two-way . . . You feel for it. .
https://bitcoin.org/en/alert/2014-04-11-heartbleed
OpenSSL Heartbleed vulnerability 11 April 2014What happened The version of OpenSSL used by Bitcoin Core software version 0.9.0 and earlier contains a bug that can reveal memory to a remote attacker. See http://heartbleed.com/ for details. What you should do Immediately upgrade to Bitcoin Core version 0.9.1 which is linked against OpenSSL version 1.0.1g. If you use the official binaries, you can verify the version of OpenSSL being used from the Bitcoin Core GUI's Debug window (accessed from the Help menu). If you compiled Bitcoin Core yourself or use the Ubuntu PPA, update your system's OpenSSL. Linux users should also upgrade their system's version of OpenSSL. Android Android version 4.1.1 is vulnerable to Heartbleed. Try if you can upgrade to at least Android 4.1.2. If you are using Bitcoin Wallet on an Android phone, you should upgrade the app to at least version 3.45. How serious is the risk If you are using the Windows version of the Bitcoin Core GUI without a wallet passphrase, it is possible that your wallet could be compromised by clicking on a bitcoin:. Payment request link If you are using bitcoind (on Linux, OSX, or Windows) , have enabled the-rpcssl option, and allow RPC connections from the Internet, an attacker from a whitelisted (-allowip) IP address can very likely discover the rpcpassword and the last rpc request. It is possible (but unlikely) private keys could be sent to the attacker.
submitted by 51btc to Bitcoin [link] [comments]

4. Installing Bitcoin Core on Linux [Streamed] - Compiling a Bitcoin Wallet for Windows How To Install Bitcoin Core And Multibit Wallet On Ubuntu 14.10 A Guided Tour Through The Bitcoin Source Code Part 6 - Building Bitcoin From Source Compile Bitcoin's source code (0.13)

Intro. This guide is specific to getting LND 0.5-beta and Bitcoind running on Ubuntu 16.04 LTS for mainnet. It is ageing rapidly and includes steps not necessary on newer versions of LND Bitcoin has now an officially maintained PPA with a release candidate version of the peer-to-peer daemon and the client.. Bitcoin has a launchpad project i.e. same project status as Unity/Docky/Openshot etc. The maintainer - Matt Corallo - is a major contributor to the official bitcoin.org website.. This will upgrade all versions from 10.04 and later. This post explains how you can install Litecoin (LTC), DASH and any other Altcoin that is based on (forked from) original bitcoind on your Ubuntu server.. Since I have already explained how to compile Bitcoin from source on a Ubuntu machine in my previous post, the procedure to install these altcoins is not different at all. Compile Bitcoin on Ubuntu 14.04. GitHub Gist: instantly share code, notes, and snippets. ... install build-essential sudo apt-get install libssl-dev sudo apt-get install libboost-all-dev sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev sudo apt-get install libdb4.8++-dev sudo apt-get install qt4 ... Next, update Ubuntu’s software package lists: $ sudo apt-get update Finally, install Bitcoin core itself. Enter “Y” when asked asked for permission to continue: $ sudo apt-get install bitcoin-qt This last command may take some time, during which both Bitcoin Core and all of its dependencies will be installed. Run Bitcoin Core

[index] [27785] [4033] [1257] [15799] [963] [4205] [26115] [18416] [24438] [28958]

4. Installing Bitcoin Core on Linux

Ubuntu -1 Setting up Bitcoin Commands, sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install bitcoin-qt sudo apt-get install bitcoind sudo blkid sudo nano /etc/fstab ... This video is unavailable. Watch Queue Queue. Watch Queue Queue sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install bitcoin-qt bitcoind Linux terminal new stuff: clear, ll, cd, touch, echo, cat, shutdown www.bitcoinhackers.org How to install Bitcoin on Ubuntu 16.04 On this video, I will show you how to install Bitcoin on Ubuntu 16.04 Commands sudo apt-add-repository ppa:bitcoin/bitcoin sudo apt-get update “sudo apt ... To add the PPA and install Bitcoin open a terminal window (press Ctrl+Alt+T) and copy+paste the following lines: sudo apt-add-repository ppa:bitcoin/bitcoin -y sudo apt update && sudo apt install ...

#